- Clean design. Fast drying. Made for everyday use.
This soap holder uses a raised honeycomb grid to keep soap dry between uses. Water drains into the base, reducing residue and extending the life of your soap.
The honeycomb grid is shaped to improve grip and help keep the soap in place while allowing water to drain.
The model is split into two parts: a base and a removable drainage tray. This makes it easy to clean and simple to print.
Designed in Fusion with a focus on function, clean geometry, and reliable printing.
Key Features
Honeycomb drainage grid for airflow and water runoff
Shaped grid improves grip and prevents the soap from sliding
Reversible tray — flip upside down for a flat top surface
Two-part design (base + removable tray)
Fast-drying functionality
Minimalist look for modern bathrooms
Optimized for FDM 3D printing
Dimensions:
Length: 100 mm
Width: 60 mm
Height: 20 mm
Print Settings (recommended)
Material: PLA or PETG
Layer height: 0.2 mm
No supports required
Standard infill (10–20%)
Note:
Good first-layer adhesion is important for a clean honeycomb pattern. Ensure your bed is well-leveled and properly prepared.
Files Included
soap-holder-base.stl
soap-holder-drainage-tray.stl
Notes
Designed for smaller bar soaps for optimal fit and drainage
Designed clearance between parts to compensate for FDM printing variation and ensure easy assembly
Model has been test printed successfully
📜 License
You may sell physical 3D prints made from these files.
Do not redistribute, resell, or share the digital files.
- Clean design. Fast drying. Made for everyday use.
This soap holder uses a raised honeycomb grid to keep soap dry between uses. Water drains into the base, reducing residue and extending the life of your soap.
The honeycomb grid is shaped to improve grip and help keep the soap in place while allowing water to drain.
The model is split into two parts: a base and a removable drainage tray. This makes it easy to clean and simple to print.
Designed in Fusion with a focus on function, clean geometry, and reliable printing.
Key Features
Honeycomb drainage grid for airflow and water runoff
Shaped grid improves grip and prevents the soap from sliding
Reversible tray — flip upside down for a flat top surface
Two-part design (base + removable tray)
Fast-drying functionality
Minimalist look for modern bathrooms
Optimized for FDM 3D printing
Dimensions:
Length: 100 mm
Width: 60 mm
Height: 20 mm
Print Settings (recommended)
Material: PLA or PETG
Layer height: 0.2 mm
No supports required
Standard infill (10–20%)
Note:
Good first-layer adhesion is important for a clean honeycomb pattern. Ensure your bed is well-leveled and properly prepared.
Files Included
soap-holder-base.stl
soap-holder-drainage-tray.stl
Notes
Designed for smaller bar soaps for optimal fit and drainage
Designed clearance between parts to compensate for FDM printing variation and ensure easy assembly
Model has been test printed successfully
📜 License
You may sell physical 3D prints made from these files.
Do not redistribute, resell, or share the digital files.